Skip to content

Certificate of analysis

Batch ZT703425

Analytical results for this batch of CJC-1295 No DAC / Ipamorelin. A certificate belongs to a batch: these results describe this batch of material and no other.
Lot ZT703425Issued by ILS Laboratories
Batch number
ZT703425
Issuing laboratory
ILS Laboratories
Certificate number
COA-2026-954835
Test type
Full QC Panel
Date received
2026-08-03
Date issued
2026-08-03
Appearance
Good
Purity as certified
99.74%
Net peptide content
10.23 mg
Tests performed
Identity (HPLC-RTM) · Purity (HPLC) · Net blend peptide content · Heavy metals (ICP-MS) · Fentanyl screen · Sterility (PCR) · Endotoxin (USP <85>)

Results

AnalyteMethodResultSpecificationStatus
Peptide Purity (HPLC)RP-HPLC99.74%>= 95.0%PASS
Net Blend Peptide Content10.23 mgReport OnlyN/A
Identity (ID)HPLC-RTMConfirmedCJC-1295PASS
Arsenic (As)ICP-MSNot Detected ppm<= 1.5 ppmPASS
Cadmium (Cd)ICP-MSNot Detected ppm<= 0.5 ppmPASS
Lead (Pb)ICP-MSNot Detected ppm<= 1.0 ppmPASS
Mercury (Hg)ICP-MSNot Detected ppm<= 1.5 ppmPASS
Chromium (Cr)ICP-MSNot Detected ppm<= 10.0 ppmPASS
Positive Control0.5N/A
Negative Control0N/A
Fentanyl ScreenImmunoassay, 50 ng/mL cutoffNot DetectedPASS
Sterility (PCR)PCRNo GrowthNo GrowthPASS
Endotoxin (USP <85>)USP <85> kinetic chromogenic0.112 EU/mL< 0.25 EU/mLReported

Conformity across the batch

6 samples drawn from this batch and tested separately.

SamplePurityNet contentIdentityResult
Sample 099.74%10.23 mgConfirmedPASS
Dedicated V099.74%10.65 mgConfirmedPASS
Conformity V198.91%10.29 mgConfirmedPASS
Sample 198.91%10.17 mgConfirmedPASS
Conformity V299.31%10.37 mgConfirmedPASS
Sample 299.31%10.53 mgConfirmedPASS
Purity (HPLC)
99.32% ± 0.3389%
Net Blend Peptide Content
10.37 mg ± 0.1683 mg
Endotoxin (USP <85>)
0.11 EU/mL ± 0.0000 EU/mL
Signed Dr. Greg Kalyuzhny, Lab DirectorAccess code 4MSF4BSQ
Verify with the laboratoryView the compound

How to read this certificate

The identity result should be read alongside the laboratory method shown above. HPLC-RTM compares chromatographic retention time with a reference standard. Purity is reported by HPLC as a percentage of total peak area at a stated wavelength — a proportion of what the detector saw, not a proportion of the vial's mass. Net peptide content is the measured peptide amount in the tested sample. For a blend, the total does not establish each component's amount unless the laboratory reports those amounts separately.

A fuller explanation of each parameter is in how to read a peptide certificate of analysis, and the distinction between purity and net content is set out in purity versus net peptide content.

Check the batch number above against the number printed on the vial in front of you. If they do not match, this is not your certificate — search the certificate library for the number on your label.

For laboratory research use only. Not for human or veterinary consumption.